#HOW TO OPEN FILES FROM VE LXI IN WINPCSIGN BASIC HOW TO#
#HOW TO OPEN FILES FROM VE LXI IN WINPCSIGN BASIC REGISTRATION#

#HOW TO OPEN FILES FROM VE LXI IN WINPCSIGN BASIC REGISTRATION#

Then you would hit the Origin button on the plotter to set that position as the 0,0 origin point.ДЎ3) Once the origin is set properly, click on 'Next' from step 10 picture and it will automatically move towards the first registration mark (top, left).ДЎ4) Then click on 'Scan+Cut', from the next screen, this will send the data to the cutting plotter from software for cutting. Setting the origin on the plotter is typically done by using the Arrow buttons on the plotter to move the blade carriage.

#HOW TO OPEN FILES FROM VE LXI IN WINPCSIGN BASIC HOW TO#

If you are using a different cutting plotter, refer your cutter manual on how to set the origin. ( I am using GCC Expert II 24 LX cutter). Place that on bottom right on the cutter and move the blade to match that registration mark, select Origin Set, then press online. The detailed step by step on Print and Cut with Easy Cut Studio and GCC Expert II CutterДў) Import a vector image, (SVG/EPS/AI/PDF(vector) file types), or create the design you want to do a Print and Cut for.ДЈ) Select the image, by selecting Ctrl + A (on Windows).Д¤) Go to 'Effects' on the menu and select 'Shadow Layer (Contour Cut)' option.ДҐ) A dialog box will open, increase the inches and change the color as per your choice.Д¦) Then make sure you select the 'Print+Cut Outline' and 'Outline only' from the same dialog box.ДЁ) Then go to 'Cutter' menu and select the option 'Cut with GCC'Д©) After the dialog box opens, then click the 'Print+Cut' button in the lower left corner.ДЎ0) A dialog box will open, in that dialog box, click the 'Print' button to print with your printer and it will print your design along with the necessary registration marks around the design.ДЎ2) Place the printed sheet on the cutting mat, make sure one of the registration mark will have cross line depending on your printer. The demo copy is fully functional, with watermarks added until you register. You can download the trial version of Easy Cut Studio here. You just have to mess with the settings, thatвЂ™s all. Also, I unchecked Smooth because it yielded better results. If you want to offer custom stickers/decals is possible through this feature and with 'Trace' feature, if the image is not in a vector format. In order to fully vectorize with colors intact, weвЂ™ll need to use Multiple Scans.Choose Colors and make sure you pick enough scans to cover all of the colors - 7 scans looked good in this case. This Print and Cut feature is very helpful if you are planning to do a stickers/decals/heat transfer paper. Many cutting machines with built-in laser on the market today which allows to you do a very precise print and cut, where you print out your artwork with your printer and then load it into your cutting plotter so you can accurately cut it out.ДЇollow the below simple steps to achieve the best Print and Cut feature from Easy Cut Studio.

How to open files from ve lxi in winpcsign basic